In many cases NovaTuff can go over the existing surface. It is essential to properly prepare the surface for an epoxy coating. If the current coating if flaking or peeling then it needs to be mechanically removed.
You may also like
Standard NovaTuff roof coatings area available in white, tan and gray. White is the most energy efficient.
NovaTuff reaches its full cure after 7 days at 80 degrees F. It can typically be walked on after 24 hours and […]
NovaTuff can be applied with a brush, roller or spray equipment. Spraying requires a commercial spray rig with 2500 psi minimum and […]
Yes, use 2 coats of NovaTuff P-505 Epoxy Primer at 1 gallon per 150 to 200 square feet. Concrete must be more […]